Compression Connector Straight Conductor ACSR 500-Plate, 90º
In order to offer the total guarantee and quality, Arruti Substations has designed the products, following the national and international standard rules
(UNE-21021, NEMA CC1, Etc.), a connectors line, capable of working under superior intensities than conductors itself.
General Description
General
Substation connectors ensure reliable electrical connections between components like transformers and circuit breakers. They handle high voltages, minimize power losses, and resist environmental stresses, ensuring the safety and efficiency of the power system.
Materials
The most important materials used in our products are the following:
- Copper Alloy 85%Cu-5%Sn-5%Zn-5%Pb - CB491K y CC491K (s/Norma UNE-EN 1982-1999)
- Aluminium Alloy Al 7Si 0,6Mg – EN AC-42200 (s/norma (UNE-EN 1706-1998)
- Copper Alloy (Forged Brass) UNE EN 12165-1999
- Inox. Steel Screw AISI-304(A2-70/80) ó AISI-316(A4-80) (UNE-EN 10088-1-2-3)
Connector types
- Earthing material.
- Bronze or Aluminium connectors, designed with seen bolts, with 2 or 3 independent covers, for better contact and avoid mechanic tensions.
- Bimetallic connectors, made of one Bronze part and another of Aluminium jointed by a bimetallic plate (CUPAL) propely assambled and sealed in factory.
- Monometallic connectors (MASSIVE ANODE) for High or Very High Tension, designed with shunk bolts and rouded edges, in order to avoid under normal conditions the phenomenons of corona effect and RIV, anyway, these connectors can also be used for lower tensions.
- Countercontacts for pantographes.
Технически характеристики
| Brand | |
|---|---|
| Manufacturer | Arruti Substations |
| Dimensions | |
|---|---|
| Conductor Diameter | Ø30.22 mm. |
| Plate Size | 100x100 mm. |
| Electrical Data | |
|---|---|
| Rated Current | 1000 A |
| Rated short-time withstand current | 50 kA/1s |
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.